|
Wheelchair and Scooter Ramps for Disabled Acess |
Wheelchair Ramp for Disabled Access
|
Roll-a-Ramp
supply wheelchair ramps to make life accessible. The ramps
provide a new concept in small, lightweight, portable portable
ramps and solve access problems at home and away.
Roll-a-Ramp acts as a safe and strong portable wheelchair ramp that sets up and
stores away easily. Lightweight and easy to carry, this roll-up ramp system allows
convenient wheelchair access to and from any vehicle, building or home. |
When
rolled up Roll-a-Ramps can easily be placed in the boot
of a car or hatchback for transportation. This reduces
the worry of not having ready access to buildings, homes
of friends and relatives or access to hotels etc., when
on holiday.
Roll-a-Ramps
are constructed from high tensile anodised aerospace
aluminium making them relatively lightweight and manageable
for a carer or friend to deploy.
|
|
Setting
up could not be easier. Simply unroll the ramp and
place the top tread on to the step.
The Roll-a-Ramp
is now fully ready for use.
|
|
Roll-a-Ramps
are available
in either 12" (30.48cm)
width pairs
or single width
ramps of
30" (76.2cm)
wide.
|
. |
The
pairs will take a load
of up to 907kg (1 ton)
whilst the single width
ramp can hold up to
450kg (½ a ton).
Ramps can be supplied
in any length requested.
Roll-a-Ramps have built
in "side rails" to
help prevent wheels
easily rolling off
the edge.
|
|
The
length of the Roll-a-Ramp can be easily adjusted by the
addition or removal of the treads. These
are in 6" ( 15.25cm ) sections which are easily |
 |
 |
removed
or added by the use of an allen key and spanner (provided).
This means that should you change the
location of the ramp or require a greater or lesser gradient
you do not have to buy a whole new set.
Both
the qualities of the materials and the engineering which go into
each Roll-a-Ramp undoubtedly makes them the finest quality product
of its type. So
confident |
| are
we in the quality that we offer a 10 year warranty* on each
Roll-a-Ramp. |
Some
comments from a few of our customers..
"You
don’t realise how great
it is until you have tried one says Sue. But one thing is
certain: now that I have got one, I just wouldn’t
be without it"
Sue Carnell
“I
am overwhelmingly impressed with the reliability and stability
of the product.
Being so steady but at the
same time adaptable and lightweight, it is extremely user
friendly.”
Irene Moore
Hoskyn Centre, Rugby
|
"The
ramps have enabled us to secure more business.Having a Grade
Two listed building made the new Disability Act 2004 hard to
comply with but having Roll-a-Ramp has solved this problem".
Jonathan
Morris MHCIMA
General Manager
Royal Aeronautical Society
W1
..................................Click
Here For More User Feedback
*
Subject to the ramps not having been overloaded
or misused and applicable to the end user only.
|
|
|
|
|
| Scooter Ramp for Disabled Access |
|
The
single width Roll-a-Ramp available in either 26" (66cm)
or 30" (76.2cm) is ideal for scooter use (as
well as wheelchairs of course). These ramps can provide
scooter access for disabled persons into the rear
or
side of either converted vans or people carriers
etc. |
|
|
| |
They
will accept a load of around ½ a ton (450kg)
and can be readily deployed with the top tread simply
resting on the loading platform or fixed semi-permanently
by use of the optional bracket kit. The ramp can then
be rolled up and kept in the vehicle for use upon arrival.
Each
Roll-a-Ramp is
fabricated out
of high tensile
anodised aerospace
aluminium and is
therefore easy
to handle
and deploy. Each
ramp has built-in
side safety rails
to help prevent
wheels rolling
off the
edge and has special "on
off" treads
at the top and
bottom which provide
a smooth jar free
access on and off
the ramp for easy
access for the
disabled person. |
|
|
Although
low in weight the single width Roll-a-Ramp can,
depending upon its length, hold a evenly distributed
weight of up to 1,000 lbs. (453.6kg).
This means
that a scooter, its occupant and two other people
could be safely supported. Treads can be added
or removed at will by use of the simple tools
provided and therefore should the application
change it is not necessary to purchase a complete
new ramp |
| |
|
|
|
|
|
|
|
| |
|
| Tel: |
+44
(0) 20 8346 4477 |
| Fax: |
+44
(0) 20 8346 6002 |
|
Roll-a-Ramp
(Europe) Ltd
Unit
4
Bittacy Business Centre
Bittacy Hill
Mill Hill East
London
NW7 1BA |
|
|
|
|
